Skip to main content

Slow performance on computer using Windows

Having issue slow performance on computer maybe it cause by the computer has a bad sector on hard drive or system infected by viruses or malware. Before we going to check on hardware, first thing we do is to check the software. Slow performance may happen by to many services running on the background of the system, we can disable it on msconfig. Here is the steps we can do before take any action further more.







1. On search files and programs type "msconfig" then enter
  2. Click Services tab then click Enable all
3. Check Hide all Microsoft services
 4. Click Disable all
Note. We can Enable necessary service one by one

5. Click Apply then OK
6. Restart Computer

See also:
Abnormal Behavior Occurs After Calibrate Touch Screen
Check the unknown device with USB ID

Popular posts from this blog

USB PowerShare Technology

USB Universal Serial Bus (USB) is a standard to establish communication between a computer and different devices. USB allows high speed connection of peripherals to a computer. Using USB, you can connect devices like mice, keyboards, printers, external drives, digital cameras, mobile phones, and so on. USB also supports Plug-and-Play installation and hot swapping.

Keyboard shortcuts to memorize and use

Below are some Keyboard shortcuts we recommend everyone memorize and use. Ctrl + C or Ctrl + Insert and Ctrl + X Both Ctrl + C and Ctrl + Insert will copy the highlighted text or selected item. If you want to cut instead of copy press Ctrl + X  

TCP/IP Model Layers

The TCP/IP model uses four layers that logically span the equivalent of the top six layers of the OSI reference model; this is shown in Figure. (The physical layer is not covered by the TCP/IP model because the data link layer is considered the point at which the interface occurs between the TCP/IP stack and the underlying networking hardware.) The following are the TCP/IP model layers, starting from the bottom. Network Interface Layer As its name suggests, this layer represents the place where the actual TCP/IP protocols running at higher layers interface to the local network. This layer is somewhat “controversial” in that some people don't even consider it a “legitimate” part of TCP/IP. This is usually because none of the core IP protocols run at this layer. Despite this, the network interface layer is part of the architecture. It is equivalent to the data link layer (layer two) in the OSI Reference Model and is also sometimes called the link layer. You may also ...